Minn Kota heading sensor wiring Help! I need to install the heading sensor that comes with the new Ulterra. My preferred location is nearest to the two 12v batteries that make up my 24V system. I’m concerned with the amp draw of the sensor puck drawing one battery down more than the other causing problems. I can’t find what the amp draw is for the puck so I’m coming here to see if anyone else has done it this way and what was your experience. I’ve also read I should connect the negative lead to the battery that has the negative lead for the trolling motor attached to it and use the same battery for the positive lead.
Minn Kota Electric Trolling Motor for Sale
Then go catch it. Humminbird MEGA Imaging opened the eyes of anglers everywhere by taking fish finding into the megahertz frequency for the first time. Sweeping multiple frequencies across a broad spectrum, this powerful tool eliminates noise for precisely defined targets. A spring-loaded assembly on the Terrova mount makes stowing the trolling motor effortless, every time. Press this lever on the mount and fallaway ramps will effortlessly slide your trolling motor into the water.
And when you’re ready to move, Lift-Assist helps the motor stow effortlessly.
motor guide circuit board Posted by David Borkholder on Jun 5th Easy to swap out. Programmed the remote and foot pedal everything works perfectly.
Snook fishing ain’t bad either Posts: Originally Posted by King P. FYI, Hand steer’d units are gunna narrow down what you are looking for. Foot pedal units open up some options that hand units don’t provide. And most units can get Universal Sonar built in transducer. However, 24 volts gives you 80 lbs of thrust but you HAVE to run 2 batteries. More thrust and two batteries is always better but..
In my opinion, 24 volt TerrRova with removalble bracket Ipilot, universal sonar with a bow depth-finder is spot on, but again, I fish walleye not I’d go make friends with the local fishermen down at the docks and see what they do and why, OR why not!! None of these are saltwater motors though. There are no foot control SW approved versions that I know of. That pretty much sums up a 24v system to a “T”. Cabela’s sells a great onboard charger that happens to be on sale right now:
Find a Trolling Motor : MotorGuide Trolling Motors
August 17, Summary: The Minn Kota Maxxum, in my opinion, sets the standards for other trolling motors in its class. My experience with the Maxxum has nothing but positive, so I have no problems whatsoever with giving this a super-solid 5 stars. Trolling motors are kind of like pickup trucks when it comes to brand loyalty. I also prefer one brand.
Quality Marine Supply Minn Kota PowerDrive 70 Trolling Motor – 24Vlb –  – PowerDrive 70 Trolling Motor – 24VlbALWAYS updated mount with the same attitude. We rebuilt PowerDrive to make it tougher and sleeker, but it’s gonna keep doing what it’s always done: show up to the launch ramp, day after day, with big-time technology, trusted power, and easy.
Which Minn Kota trolling motor?? Mar 25, , Cabela’s has an on-line article that pretty much covers all of the basic needs and options you are asking about. I found it interesting and informative about the new technology. The link won’t work Anyway, go to Cabelas website and type in trolling motors. On the right side about the middle there is a link for a buyers guide.
Most of the features you are talking about can be boiled down to a couple of criteria; need and the amount of money you are willing to spend.
(Trolling speed >> older model minn kota trolling motor longer cable)
Saturday, January 14, Gps fish finder and trolling motor? I want to upgrade my trolling motor to a minn Kota with ipilot and my fish finder with one that has gps. Now I hear you can hook the motor to the fish finder. What would be the benefit of doing this?
Hook Removers; Fish Grippers; Lure Retrievers; Other Tools; Fishing Accessories. Minn Kota i-Pilot Wireless GPS Trolling System; Minn Kota i-Pilot Wireless GPS Trolling System. Just replace the top of the motor head, activate your remote and you’re ready to fish.
Buddy optional Transducer wire zip-tied at the bottom of the shaft. Remove the 4 screws under the motor head. The top portion is the iPilot unit. Inside you will see wires and we have to disconnect some of these. Take a mental photograph of how things are laid out inside. Disconnect the US2 cable. Do not lose these you have to put them back on. Disconnect the brown ground wire. The wire is connected to an inline fuse holder. Disconnect at the wire closest to the shaft.
The connector is in shrink tubing. Under the motorhead there is a bolt that goes through the shaft.
Does anyone have a MInn Kota power drive trolling motor
Thanked Times in Posts Thanks for the responses guys. I’ll check that website chumhead. Talking with minn-kota rep today, he said that this problem happens when the motor doesn’t get enough current. Turning the motor left and right takes less current than running the motor. Have the batteries load tested. Just like your car batteries.
Boat GPS, Computers, Electronics, Trolling Motors, and more. Shop Fwd Exhaust Saltwater Actuator online. This site has dug up a varied catalog at reasonable costs. .
Power Steering reduces steering effort and foot fatigue, making Ultrex the smoothest, most responsive motor you’ve ever driven. Get instant response with all-day comfort. Spot-Lock uses GPS to lock you onto a fishing spot, and now we’ve reengineered it to work smarter and hold you stronger and more accurately than ever. Updated with hardware and software algorithms for better accuracy, Spot-Lock is the most accurate GPS anchor ever.
You can see for yourself with the new “Distance to Spot” reading on the remote, to show you just how close you are. Plus, the new Jog feature lets you most your Spot-Lock in five-foot increments in any direction. Steering Lock When you take your foot off Ultrex’s foot pedal, the motor head remains pointed in the direction you left it last – so you can keep your heading without loosing your bite.
There’s no recoil or readjustment – just easier steering every day. New i-Pilot Link – On Select model Link lets you control your motor from your Humminbird or its new touch-screen remote. It includes our new most accurate Spot-Lock ever, every i-Pilot feature, and the ability to follow depth contours, save and retrace your Humminbird Current Track, and return to waypoints. Get the most accurate Spot-Lock ever, plus Advanced AutoPilot, track recording, and control of speed, steering and cruise control.
So naturally,Minn Kota just made it better. A tougher, sleeker new mount houses an arsenal of innovative options. Nobody outworks a Riptide.
Minn Kota Endura C2 30 Transom-Mount Trolling Motor, 12V, 30 Shaft is rated out of 5 by Rated 5 out of 5 by burt from Price was super low. Ordering was a snap/5(15).
If you have a specialty order I am searching for a power pole for my husband for Father’s Day. I do know that we fish in the Gulf on the flats and his boat is 17ft Capehorn. Will the Dig In work for us and if so, which model and how do I know if he’d need stern or bow mount? I really would prefer your system over the power poles setup. I was wondering if you have some kind of affliate program for semi pro fishermen. I think your product would be huge in our type of fishing setups.
I would be more than happy to pass out literature at seminars and display your sticker on my boat. What ever you prefer. I think your bow mount setup would really be a hit with crappie fisherman. Center Console 18ft I have a trolling motor and a 90 hp I fishing in the water way at nc beaches with the different tide ft and currents and the waves, what is the right system for my needs.
How much is it to get a trolling motor hook up installed
Endura C2 is the legendary performer that’s built to explore, built to last and backed up with our two-year warranty. It’s the ultimate coming together of form and function, in a package that puts you on the water day after day, year after year-like no other. The majority of your contributors possess about a person! The price try down at minute but it might not maintain using this method – choose it great compare Minn Kota Endura C2 30 Freshwater Transom Mounted Trolling Motor 30″ Shaft device now!
For the our very good pricing, that the cheap Minn Kota Endura C2 30 Freshwater Transom Mounted Trolling Motor 30″ Shaft reviews comes commonly respected and is obviously one favored choice for many people. Poster Revolution has additional one terrific details which equals ideal affordable.
Nov 20, · Been in storage for the last 8 years. Registered in my name. This is a 10ft boat. More room. New ones will cost around or more with tax and shiping. Than you would have to buy a trolling motor and battery and that would be another You get everything here for Very stable in the water. You get everything shown in the photos.
Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune verification firm. Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to. JustAnswer in the News: If you’ve got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers Web sites like justanswer.
Traffic on JustAnswer rose 14 percent I will tell you that What Customers are Saying: Wonderful service, prompt, efficient, and accurate. Couldn’t have asked for more.
Can you adjust the shaft up and down on a Minn Kota Edge bow mount trolling motor
December 2, Best money ever spent on fishing f I would have fished on a boat with one just once I would have bought an ipilot years ago. If you fish by yourself or take people who do not fish a whole lot this thing is an absolute must. It completely frees you up. I can retie lures, take a fish off the hook, and actually fish without constantly running to the bow to make an adjustment on my old hand control.
I tell you what I am very glad I went with the 72″.
• Attach the CoPilot receiver to the right side plate (2 screws), plug it into the back of the motor and CoPilot is ready to fish. It installs easily with plug-n-play design and a receiver that attaches to the right side plate of the trolling motor mount.
Its shaft length is 30 inches and has a 6 inch telescoping handle. It is fitted with a tilt twister tiller which provides smooth speed control and steering. It is integrated with the lever lock bracket that offers you a rock solid mount. This is very good especially when you are fishing. The Minn Kota trolling motor is designed to work at 5 different speeds for going forward and 3 speeds for moving backward.
This provides you enough speed that allows you to handle any situation well. The manufacturer has provided a lifetime warranty with the trolling motor. This covers the shaft and a 2 year warranty has been provided that covers the motor. You can rely on the Minn Kota Endura C2 30 trolling motor especially for heavy usage. It is designed not to heat up even for extended usage. The temperature does not arise which would otherwise cause damage to the electric components.
Mounting a transducer on a Minn Kota trolling motor
Minn Kota only makes one saltwater transom-mount, because it’s the only one you’ll ever need. Here you will find reasonable product details. One more option for your online shopping. Thanks to everyone who came to visit us to view our products.
MKR-MDI-1 Humminbird HELIX MDI Sonar Adapter Cable. Connects your Humminbird HELIX fishfinder to a Minn Kota motor with built-in MEGA Down Imaging.
Is the primary use of your boat in salt or fresh water? Knowing the length of the boat will help us display the optimal product for best performance. The measurement is taken from the front of the boat to the back of the boat Number of Batteries How many batteries are dedicated to the trolling motor? Batteries help stuff What part of the boat do you want to mount the motor hint: First, that depends on whether you want a transom mounted motor or a bow mounted motor.
If you go with a transom mounted motor then you need to know the distance from the transom to the waterline when your boat is loaded. You want to take that distance and add at least 20 inches to it. If there isn’t a shaft in that size then round up. Let’s say the distance is from the transom to the waterline is 10 inches. You then add 20 inches to that and the length of shaft you want is 30 inches.
If you want a bow mounted motor then you take the length from the top of the bow where the motor would be mounted to the waterline when the boat is loaded. You then add 20 inches to that number and then round up to the next longest shaft if you have to. So, if the distance from the bow to the water is 15 inches then you will add 20 inches to that. You come up with 35 inches but find that there is no motor for the brand you want with a 35 inch shaft.